Move Heights
The Move Heights section sets the Z height used for travel in X and Y during a Solo tool change.
Profile Section
Fields
| Field | Description |
|---|---|
| Z Clearance | The MACHINE COORDINATE Z at which the spindle clears all obstacles. It is common practice to set this to the top of Z travel. Every move in X and Y during a tool change is made at this height. |
| Z Move To Load | Not used with the Solo. Shown for reference only and cannot be edited. |
| Z Move To Measure | Not used with the Solo. Shown for reference only and cannot be edited. |
A Solo profile has no Synced / Overridden chips. Z Move To Load and Z Move To Measure can be set only on a profile with a tool magazine, using the chips in that profile's Move Heights section.