Tool Setter Position
The Tool Setter Position section sets where your tool setter is, in MACHINE COORDINATES. Tool measurement moves the spindle here before it probes. See Tool Measurement.
Fields
| Field | Description |
|---|---|
| X Position | MACHINE COORDINATE X of the center of the tool setter. |
| Y Position | MACHINE COORDINATE Y of the center of the tool setter. |
To measure, the spindle moves to this X and Y at Z Clearance (set in Manual Position), then down to Z Start Position (set in Tool Measurement), and then probes.
A manual tool change profile has no magazine, so there is no Relational Position to choose and no dust cover to open or close.